#
# Cisco Pine config for Exchange created by /usr/cisco/bin/pinexch
#
user-domain=cisco.com
default-fcc=
postponed-folder=
rsh-open-timeout=0
folder-collections=Exchange {email.cisco.com/user=xbalaji}[],
    Local mail/[]
inbox-path={mail.cisco.com/user=xbalaji}INBOX
smtp-server=outbound.cisco.com
#
# End Cisco Pine config for Exchange
#
#
# Cisco Pine config for Exchange created by /usr/cisco/bin/pinexch
#
#user-domain=cisco.com
#default-fcc="{email.cisco.com}Sent Items"
#postponed-folder="{email.cisco.com}Drafts"
#rsh-open-timeout=0
#folder-collections=nsmail/[]
#inbox-path={email.cisco.com}INBOX
#smtp-server=outbound.cisco.com
#
# End Cisco Pine config for Exchange
#
# Updated by Pine(tm) 4.21, copyright 1989-1999 University of Washington.
#
# Pine configuration file -- customize as needed.
#
# This file sets the configuration options used by Pine and PC-Pine.  If you
# are using Pine on a Unix system, there may be a system-wide configuration
# file which sets the defaults for these variables.  There are comments in
# this file to explain each variable, but if you have questions about
# specific settings see the section on configuration options in the Pine
# notes.  On Unix, run pine -conf to see how system defaults have been set.
# For variables that accept multiple values, list elements are separated
# by commas.  A line beginning with a space or tab is considered to be a
# continuation of the previous line.  For a variable to be unset its value
# must be blank.  To set a variable to the empty string its value should
# be "".  You can override system defaults by setting a variable to the
# empty string.  Switch variables are set to either "yes" or "no", and
# default to "no".
# Lines beginning with "#" are comments, and ignored by Pine.


# Over-rides your full name from Unix password file. Required for PC-Pine.
personal-name=

# Sets domain part of From: and local addresses in outgoing mail.
#user-domain=

# List of SMTP servers for sending mail. If blank: Unix Pine uses sendmail.
#smtp-server=imop.cisco.com

# NNTP server for posting news. Also sets news-collections for news reading.
nntp-server=

# Path of (local or remote) INBOX, e.g. ={mail.somewhere.edu}inbox
# Normal Unix default is the local INBOX (usually /usr/spool/mail/$USER).
#inbox-path={mira-sjc5-c.cisco.com}inbox

# List of incoming msg folders besides INBOX, e.g. ={host2}inbox, {host3}inbox
# Syntax: optnl-label {optnl-imap-host-name}folder-path
incoming-folders=

# List of directories where saved-message folders may be. First one is
# the default for Saves. Example: Main {host1}mail/[], Desktop mail\[]
# Syntax: optnl-label {optnl-imap-hostname}optnl-directory-path[]
#folder-collections="Local Folders" nsmail/[]

# List, only needed if nntp-server not set, or news is on a different host
# than used for NNTP posting. Examples: News *[] or News *{host3/nntp}[]
# Syntax: optnl-label *{news-host/protocol}[]
news-collections="News on usenet.cisco.com/nntp" {usenet.cisco.com/nntp}#news.[]

# List of folder pairs; the first indicates a folder to archive, and the
# second indicates the folder read messages in the first should
# be moved to.
incoming-archive-folders=/users/xbalaji/nsmail

# List of context and folder pairs, delimited by a space, to be offered for
# pruning each month.  For example: {host1}mail/[] mumble
pruned-folders=""

# Over-rides default path for sent-mail folder, e.g. =old-mail (using first
# folder collection dir) or ={host2}sent-mail or ="" (to suppress saving).
# Default: sent-mail (Unix) or SENTMAIL.MTX (PC) in default folder collection.
#default-fcc=/users/xbalaji/nsmail/Sent

# Over-rides default path for saved-msg folder, e.g. =saved-messages (using first
# folder collection dir) or ={host2}saved-mail or ="" (to suppress saving).
# Default: saved-messages (Unix) or SAVEMAIL.MTX (PC) in default folder collection.
default-saved-msg-folder=

# Over-rides default path for postponed messages folder, e.g. =pm (which uses
# first folder collection dir) or ={host4}pm (using home dir on host4).
# Default: postponed-msgs (Unix) or POSTPOND.MTX (PC) in default fldr coltn.
#postponed-folder=

# If set, specifies where already-read messages will be moved upon quitting.
read-message-folder=

# If set, specifies where form letters should be stored.
form-letter-folder=

# Over-rides default path for signature file. Default is ~/.signature
signature-file=/users/xbalaji/nsmail/.sign-01.txt

# List of file or path names for global/shared addressbook(s).
# Default: none
# Syntax: optnl-label path-name
global-address-book=

# List of file or path names for personal addressbook(s).
# Default: ~/.addressbook (Unix) or \PINE\ADDRBOOK (PC)
# Syntax: optnl-label path-name
address-book=Addr-book-01 /users/xbalaji/nsmail/.addressbook

# List of features; see Pine's Setup/options menu for the current set.
# e.g. feature-list= select-without-confirm, signature-at-bottom
# Default condition for all of the features is no-.
feature-list=compose-rejects-unqualified-addrs,
    enable-alternate-editor-cmd,
    enable-search-and-replace,
    enable-sigdashes,
    quell-dead-letter-on-cancel,
    quell-user-lookup-in-passwd-file,
    enable-reply-indent-string-editing,
    include-header-in-reply,
    reply-always-uses-reply-to,
    signature-at-bottom,
    combined-subdirectory-display,
    combined-folder-display,
    expanded-view-of-folders,
    separate-folder-and-directory-entries,
    combined-addrbook-display,
    expanded-view-of-addressbooks,
    enable-msg-view-attachments,
    enable-msg-view-urls,
    enable-tab-completion,
    enable-unix-pipe-cmd,
    enable-bounce-cmd,
    show-selected-in-boldface,
    enable-flag-cmd,
    enable-aggregate-command-set,
    enable-full-header-cmd,
    enable-jump-shortcut,
    enable-partial-match-lists,
    enable-suspend,
    enable-arrow-navigation-relaxed,
    enable-arrow-navigation,
    include-attachments-in-reply,
    compose-cut-from-cursor,
    enable-msg-view-addresses,
    enable-msg-view-forced-arrows,
    print-offers-custom-cmd-prompt,
    print-index-enabled,
    print-formfeed-between-messages,
    enable-verbose-smtp-posting,
    enable-delivery-status-notification,
    mark-for-cc,
    delete-skips-deleted,
    no-enable-mouse-in-xterm,
    no-enable-newmail-in-xterm-icon,
    save-will-advance,
    enable-msg-view-web-hostnames,
    prefer-plain-text,
    fcc-only-without-confirm,
    thread-index-shows-important-color,
    expose-hidden-config,
    allow-changing-from,
    quell-empty-directories,
    enable-print-via-y-command,
    warn-if-blank-to-and-cc-and-newsgroups,
    enhanced-fancy-thread-support,
    pass-control-characters-as-is,
    enable-full-header-and-text,
    enable-dot-files,
    scramble-message-id,
    slash-collapses-entire-thread,
    ldap-result-to-addrbook-add,
    no-enable-alternate-editor-implicitly,
    tab-visits-next-new-message-only,
    enable-incoming-folders,
    enable-dot-folders

# Pine executes these keys upon startup (e.g. to view msg 13: i,j,1,3,CR,v)
initial-keystroke-list=

# Only show these headers (by default) when composing messages
default-composer-hdrs=

# Add these customized headers (and possible default values) when composing
customized-hdrs=Priority:,
    X-Test-Message:,
    Reply-To:,
    Return-Receipt-To:

# When viewing messages, include this list of headers
viewer-hdrs=

# Determines default folder name for Saves...
# Choices: default-folder, by-sender, by-from, by-recipient, last-folder-used.
# Default: "default-folder", i.e. "saved-messages" (Unix) or "SAVEMAIL" (PC).
saved-msg-name-rule=default-folder

# Determines default name for Fcc...
# Choices: default-fcc, by-recipient, last-fcc-used.
# Default: "default-fcc" (see also "default-fcc=" variable.)
fcc-name-rule=default-fcc

# Sets presentation order of messages in Index. Choices:
# subject, from, arrival, date, size. Default: "arrival".
sort-key=Date

# Sets presentation order of address book entries. Choices: dont-sort,
# fullname-with-lists-last, fullname, nickname-with-lists-last, nickname
# Default: "fullname-with-lists-last".
addrbook-sort-rule=nickname-with-lists-last

# Sets presentation order of folder list entries. Choices: ,
# 
# Default: "alpha-with-directories-last".
folder-sort-rule=

# Sets the default folder and collectionoffered at the Goto Command's prompt.
goto-default-rule=inbox-or-folder-in-recent-collection

# Sets message which cursor begins on. Choices: first-unseen, first-recent,
# first, last. Default: "first-unseen".
incoming-startup-rule=

# Reflects capabilities of the display you have. Default: US-ASCII.
# Typical alternatives include ISO-8859-x, (x is a number between 1 and 9).
character-set=

# Specifies the program invoked by ^_ in the Composer,
# or the "enable-alternate-editor-implicitly" feature.
editor=/usr/cisco/packages/vim/vim-7.2/bin/vim -X

# Specifies the program invoked by ^T in the Composer.
speller=/usr/local/bin/ispell

# Specifies the column of the screen where the composer should wrap.
composer-wrap-column=75

# Specifies the string to insert when replying to a message.
reply-indent-string=|

# Specifies the introduction to insert when replying to a message.
reply-leadin=On _DAYDATE_, _SMARTDATETIME_, _FROM_ wrote

# Specifies the string to use when sending a  message with no to or cc.
empty-header-message=Balaji Venkataraman

# Program to view images (e.g. GIF or TIFF attachments).
image-viewer=xview

# If "user-domain" not set, strips hostname in FROM address. (Unix only)
use-only-domain-name=

# Your default printer selection
printer=Bldg-22 Printer [] enscript -2 -r

# List of special print commands
personal-print-command=Bldg-22 Printer [] enscript -2 -r

# Which category default print command is in
personal-print-category=3

# Set by Pine; controls beginning-of-month sent-mail pruning.
last-time-prune-questioned=113.1

# Set by Pine; controls display of "new version" message.
last-version-used=6.00

# This names the path to an alternative program, and any necessary arguments,
# to be used in posting mail messages.  Example:
#                    /usr/lib/sendmail -oem -t -oi
# or,
#                    /usr/local/bin/sendit.sh
# The latter a script found in Pine distribution's contrib/util directory.
# NOTE: The program MUST read the message to be posted on standard input,
#       AND operate in the style of sendmail's "-t" option.
sendmail-path=

# This names the root of the tree to which the user is restricted when reading
# and writing folders and files.  For example, on Unix ~/work confines the
# user to the subtree beginning with their work subdirectory.
# (Note: this alone is not sufficient for preventing access.  You will also
# need to restrict shell access and so on, see Pine Technical Notes.)
# Default: not set (so no restriction)
operating-dir=

# This variable takes a list of programs that message text is piped into
# after MIME decoding, prior to display.
display-filters=

# This defines a program that message text is piped into before MIME
# encoding, prior to sending
sending-filters=

# A list of alternate addresses the user is known by
alt-addresses=

# This is a list of formats for address books.  Each entry in the list is made
# up of space-delimited tokens telling which fields are displayed and in
# which order.  See help text
addressbook-formats=

# This gives a format for displaying the index.  It is made
# up of space-delimited tokens telling which fields are displayed and in
# which order.  See help text
index-format=

# The number of lines of overlap when scrolling through message text
viewer-overlap=

# Number of lines from top and bottom of screen where single
# line scrolling occurs.
scroll-margin=

# The number of seconds to sleep after writing a status message
status-message-delay=

# The approximate number of seconds between checks for new mail
mail-check-interval=10

# Full path and name of NEWSRC file
newsrc-path=/users/xbalaji/nsmail/.newsrc

# Path and filename of news configation's active file.
# The default is typically "/usr/lib/news/active".
news-active-file-path=

# Directory containing system's news data.
# The default is typically "/usr/spool/news"
news-spool-directory=

# Path and filename of the program used to upload text from your terminal
# emulator's into Pine's composer.
upload-command=

# Text sent to terminal emulator prior to invoking the program defined by
# the upload-command variable.
# Note: _FILE_ will be replaced with the temporary file used in the upload.
upload-command-prefix=

# Path and filename of the program used to download text via your terminal
# emulator from Pine's export and save commands.
download-command=

# Text sent to terminal emulator prior to invoking the program defined by
# the download-command variable.
# Note: _FILE_ will be replaced with the temporary file used in the downlaod.
download-command-prefix=

# Sets the search path for the mailcap cofiguration file.
# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2.
mailcap-search-path=

# Sets the search path for the mimetypes cofiguration file.
# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2.
mimetype-search-path=

# If no user input for this many hours, Pine will exit if in an idle loop
# waiting for a new command.  If set to zero (the default), then there will
# be no timeout.
user-input-timeout=

# Sets the time in seconds that Pine will attempt to open a network
# connection.  The default is 30, the minimum is 5, and the maximum is
# system defined (typically 75).
tcp-open-timeout=

# Sets the time in seconds that Pine will attempt to open a UNIX remote
# shell connection.  The default is 15, min is 5, and max is unlimited.
# Zero disables rsh altogether.
#rsh-open-timeout=0

# Sets the name of the command used to open a UNIX remote shell connection.
# The default is tyically /usr/ucb/rsh.
rsh-path=

# Sets the format of the command used to open a UNIX remote
# shell connection.  The default is "%s %s -l %s exec /etc/r%sd"
# NOTE: the 4 (four) "%s" entries MUST exist in the provided command
# where the first is for the command's path, the second is for the
# host to connnect to, the third is for the user to connect as, and the
# fourth is for the connection method (typically "imap")
rsh-command=

# Sets the version number Pine will use as a threshold for offering
# its new version message on startup.
new-version-threshold=

# List of programs to open Internet URLs (e.g. http or ftp references).
url-viewers=/users/xbalaji/bin/cnetscape _URL_,
    /usr/local/bin/lynx _URL_,
    /users/xbalaji/bin/cnetscape,
    /usr/local/bin/lynx

# List of mail drivers to disable. See technical notes.
disable-these-drivers=

# Set by Pine; contains data for caching remote address books.
remote-abook-metafile=

# How many extra copies of remote address book should be kept. Default: 3
remote-abook-history=

# Patterns and their actions are stored here.
patterns=

# Controls display of color
color-style=no-color

# Sets the time in seconds that Pine will attempt to open a UNIX secure
# shell connection.  The default is 15, min is 5, and max is unlimited.
# Zero disables ssh altogether.
ssh-open-timeout=

# Sets the name of the command used to open a UNIX secure shell connection.
# Tyically this is /usr/local/bin/ssh.
ssh-path=

# Sets the format of the command used to open a UNIX secure
# shell connection.  The default is "%s %s -l %s exec /etc/r%sd"
# NOTE: the 4 (four) "%s" entries MUST exist in the provided command
# where the first is for the command's path, the second is for the
# host to connnect to, the third is for the user to connect as, and the
# fourth is for the connection method (typically "imap")
ssh-command=

# Minimum number of minutes between checks for remote address book changes.
# 0 means never check except when opening a remote address book.
# -1 means never check. Default: 5
remote-abook-validity=

# Choose: black,blue,green,cyan,red,magenta,yellow,or white.
normal-foreground-color=
normal-background-color=
reverse-foreground-color=
reverse-background-color=
title-foreground-color=
title-background-color=
status-foreground-color=
status-background-color=
keylabel-foreground-color=
keylabel-background-color=
keyname-foreground-color=
keyname-background-color=
selectable-item-foreground-color=
selectable-item-background-color=
quote1-foreground-color=
quote1-background-color=
quote2-foreground-color=
quote2-background-color=
quote3-foreground-color=
quote3-background-color=
prompt-foreground-color=
prompt-background-color=
index-to-me-foreground-color=
index-to-me-background-color=
index-important-foreground-color=
index-important-background-color=
index-deleted-foreground-color=
index-deleted-background-color=
index-answered-foreground-color=
index-answered-background-color=
index-new-foreground-color=
index-new-background-color=
index-recent-foreground-color=
index-recent-background-color=
index-unseen-foreground-color=
index-unseen-background-color=

# When viewing messages, these are the header colors
viewer-hdr-colors=

# Contains the actual signature contents as opposed to the signature filename.
# If defined, this overrides the signature-file. Default is undefined.
literal-signature=

# Allows a default answer for the prune folder questions. Choices: yes-ask,
# yes-no, no-ask, no-no, ask-ask, ask-no. Default: "ask-ask".
pruning-rule=

# Network read warning timeout. The default is 15, the minimum is 5, and the
# maximum is 1000.
tcp-read-warning-timeout=

# Network write warning timeout. The default is 0 (unset), the minimum
# is 5 (if not 0), and the maximum is 1000.
tcp-write-warning-timeout=

# If this much time has elapsed at the time of a tcp read or write
# timeout, pine will ask if you want to break the connection.
# Default is 60 seconds, minimum is 5, maximum is 1000.
tcp-query-timeout=

# List of SASL authenticators to disable.
disable-these-authenticators=

# Patterns and their actions are stored here.
patterns-roles=

# Patterns and their actions are stored here.
patterns-filters=
#patterns-filters=LIT:pattern="/NICK=commits-florida/TO=flo-notification/SUBJ=Commit: florida/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-florida/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-fiddle/SUBJ=Commit: fiddle/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-fiddle/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-flo_t/TO=flo-notification/SUBJ=Commit: flo_t/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-flo_t/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-others/TO=flo-notification/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-others/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-giove/TO=giove-sw/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-others/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-pan/TO=pan-sw/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-others/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-cheyenne/TO=cheyenne-sw/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-others/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-fellowship/TO=fellowship-sw/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-others/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-redbaron/TO=redbaron-sw/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-others/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=commits-venom/TO=venom-sw/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/commits-others/NOTDEL=1/NOKILL=1",
#   LIT:pattern="/NICK=X-400-filter-test/ALL=X-Test-Message:/FLDTYPE=ANY/FOLDER=INBOX" action="/FILTER=1/FOLDER=\/users\/xbalaji\/nsmail\/xbalaji/NOTDEL=1/NOKILL=1"

# Patterns and their actions are stored here.
patterns-scores=

# Patterns and their actions are stored here.
patterns-indexcolors=

# Patterns and their actions are stored here.
patterns-other=

# Controls display of color for current index line
current-indexline-style=reverse-bg

# List of incoming folders to be checked for new mail

incoming-folders-to-check=

# Sets presentation order of threads in thread index. Choices:
# subject, from, arrival, date, size. Default: "date" (same as "thread").
thread-sort-key=

# Style that MESSAGE INDEX is displayed in when threading.
threading-display-style=

# Style of THREAD INDEX or default MESSAGE INDEX when threading.
threading-index-style=

# When threading, character used to indicate collapsed messages underneath.
threading-indicator-character=

# When threading, character used to indicate expanded messages underneath.
threading-expanded-character=

# When threading, character used to indicate this is the last reply
# to the parent of this message.
threading-lastreply-character=

# Allows a user to set rules when composing messages.

compose-rules=

# Allows a user to set rules when forwarding messages.

forward-rules=

# Allows a user to set rules when replying messages.

reply-rules=

# Allows a user to superseed global index format variable in designated folders.
index-rules=

# Allows a user to change the form a specify field in the index-format is 
# displayed.
replace-rules=

# Allows a user to change the form a specify a reply-indent-string
# based of rules.
reply-indent-rules=

# Allows a user to replace the reply-leadin message based on different parameters.
reply-leadin-rules=

# Allows a user to replace the subject of a message in a customs based way
reply-subject-rules=

# Allows a user to specify a save folder message for specific senders or folders.
save-rules=

# Allows a user to specify a smtp server to be used when sending e-mail,
# according to the rules specified here.
smtp-rules=

# Allows a user to specify the sort default order of a specific folder.
sort-rules=

# Allows a user to specify the position of a highlighted message when opening a 
# folder.
startup-rules=

# Patterns and their actions are stored here.
patterns-filters2=
#patterns-filters2=LIT:pattern="/NICK=other-me/!RECIP=xbalaji@cisco.com,pnn-team@cisco.com,jebbin-sw@cisco.com,xbalaji@epage.cisco.com/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1"
#patterns-filters2=LIT:pattern="/NICK=commits-florida/TO=flo-notification/SUBJ=Commit: florida/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-georgia/TO=geo-notification@cisco.com/SUBJ=Commit: georgia/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-fiddle/SUBJ=Commit: fiddle/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-flo_t/TO=flo-notification/SUBJ=Commit: flo_t/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-flo-others/TO=flo-notification@cisco.com/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-geo-others/TO=geo-notification@cisco.com/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-giove/TO=giove-sw@cisco.com/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-pan/TO=pan-sw@cisco.com/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-cheyenne/TO=cheyenne-sw@cisco.com/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-fellowship/TO=fellowship-sw@cisco.com/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-redbaron/TO=redbaron-sw@cisco.com/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=commits-venom/TO=venom-sw@cisco.com/SUBJ=Commit:/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=ddts-mails/FROM=DDTS bug tracking/FLDTYPE=SPEC/FOLDER=INBOX" action="/FILTER=1",
#   LIT:pattern="/NICK=X-400-filter-test/ALL=X-Test-Message:/FLDTYPE=ANY/FOLDER=INBOX" action="/FILTER=1"

# Patterns and their actions are stored here.
patterns-scores2=

# Controls display of color for the titlebar at top of screen
titlebar-color-style=reverse-indexline

# LDAP servers for looking up addresses.
ldap-servers=ldap.cisco.com "/base=c=Us,dom=cisco/impl=0/rhs=0/ref=0/nosub=0/type=name-or-email/srch=/time=/size=/cust=/nick=ldap_cisco2/matr=/catr=/satr=/gatr="

# Controls behavior when reopening an already open folder.
folder-reopen-rule=

# The approximate number of seconds between checks for new mail
maildrop-check-minimum=

# For newsgroups accessed using NNTP, only messages numbered in the range
# lastmsg-range+1 to lastmsg will be considered
nntp-range=

# If this much time has elapsed at the time of a tcp read or write
# timeout while checking for new mail in an incoming folder, pine will break the connection.
# Default is 5 seconds, minimum is 2, maximum is 60.
inc-fld-timeout=
signature-foreground-color=
signature-background-color=

# When viewing messages, number of blank spaces between left display edge and text
viewer-margin-left=

# When viewing messages, number of blank spaces between right display edge and text
viewer-margin-right=

# When viewing messages, number of lines of quote displayed before suppressing
quote-suppression-threshold=

# Sets how and when checks for new mail should happen. Choices: automatic,
# automatic-after-first-manual-check, manual-only, Default: automatic
incoming-check-rule=

# Allows a user to specify the threading style of specific folders
threading-display-style-rule=

# Allows a user to specify the threading index style of specific folders
threading-index-style-rule=

# Specifies a comma separated list of text and regular expresions that Pine
# will highlight
special-text-color=

# Specifies the string to replace quotes with when viewing a message.
quote-replace-string=

# A list of keywords for use in categorizing messages
keywords=

# Characters which surround keywords in SUBJKEY token.
# Default is "{" "} "
keyword-surrounding-chars=

# The approximate number of seconds between checks for new mail in folders
# other than the current folder and inbox.
# Default is same as mail-check-interval
mail-check-interval-noncurrent=

# Location relative to your HOME directory of the directory where your INBOX
# for the maildir format is located. Default value is "Maildir". If your
# inbox is located at "~/Maildir" you do not need to change this value.
# A common value is also ".maildir"
maildir-location=

# The maximum number of non-stayopen remote connections that pine will use
max-remote-connections=

# A list of folders that should be left open once opened (INBOX is implicit)
stay-open-folders=

# Specifies the number of dead letter files to keep when canceling.
dead-letter-files=

# Sets the filename for the newmail fifo (named pipe). Unix only.
newmail-fifo-path=

# Sets the width for the NewMail screen.
newmail-window-width=
special-text-foreground-color=red
special-text-background-color=white
index-arrow-foreground-color=
index-arrow-background-color=

# Colors used to display keywords in the index
keyword-colors=

# If set, specifies where trash is moved to in Web Alpine.
trash-folder=

# Reflects capabilities of the display you have.
# If unset, the default is taken from your locale. That is usually the right
# thing to use. Typical alternatives include UTF-8, ISO-8859-x, and EUC-JP
# (where x is a number between 1 and 9).
display-character-set=

# Reflects capabilities of the keyboard you have.
# If unset, the default is to use the same value
# used for the display-character-set.
keyboard-character-set=

# Defaults to UTF-8. This is used for outgoing messages.
# It is usually correct to leave this unset.
posting-character-set=

# Defaults to nothing, which is equivalent to US-ASCII. This is used for
# unlabeled incoming messages. It is ok to leave this unset but if you receive
# unlabeled mail that is usually in some known character set, set that here.
unknown-character-set=

# When these characters appear in the middle of a word in the composer
# the forward word function will stop at the first text following (as happens
# with SPACE characters by default)
composer-word-separators=

# Characters between subject and opening text in SUBJECTTEXT token.
# Default is " - "
opening-text-separator-chars=

# Number of times per-second to update busy cue messages
busy-cue-rate=

# Sets the time in seconds that Alpine will attempt to open a network
# connection when checking for new unseen messages in an incoming folder.
#  The default is 5.
incoming-check-timeout=

# Sets the approximate number of seconds between checks for unseen messages
# in incoming folders. The default is 180.
incoming-check-interval=

# Sets the approximate number of seconds between checks for unseen messages
# for other than local or IMAP folders. The default is 180.
incoming-check-interval-secondary=

# List of incoming folders to check for unseen messages. The default if left
# blank is to check all incoming folders.
incoming-check-list=

# Patterns and their actions are stored here.
patterns-search=
title-closed-foreground-color=
title-closed-background-color=
meta-message-foreground-color=
meta-message-background-color=
incoming-unseen-foreground-color=
incoming-unseen-background-color=
header-general-foreground-color=
header-general-background-color=
index-forward-foreground-color=
index-forward-background-color=
index-highpriority-foreground-color=
index-highpriority-background-color=
index-lowpriority-foreground-color=
index-lowpriority-background-color=
index-subject-foreground-color=
index-subject-background-color=
index-from-foreground-color=
index-from-background-color=
index-opening-foreground-color=
index-opening-background-color=

# Public certificates are kept in files in this directory. The files should
# contain certificates in PEM format. The name of each file should look
# like <emailaddress>.crt. The default directory is .alpine-smime/public.
smime-public-cert-directory=

# If this option is set then public certificates are kept in a single container
# "file" similar to a remote configuration file instead of in the
# smime-publiccert-directory. The value can be a remote or local folder
# specification like for a non-standard pinerc value. The default
# is that it is not set.
smime-public-cert-container=

# Private keys are kept in files in this directory. The files are in PEM format.
# The name of a file should look like <emailaddress>.key.
# The default directory is .alpine-smime/private.
smime-private-key-directory=

# If this option is set then private keys are kept in a single container
# "file" similar to a remote configuration file instead of in the
# private-key-directory. The value can be a remote or local folder
# specification like for a non-standard pinerc value. The default
# is that it is not set.
smime-private-key-container=

# Certificate Authority certificates (in addition to the normal CACerts for the
# system) are kept in files in this directory. The files are in PEM format.
# Filenames should end with .crt. The default directory is .alpine-smime/ca.
smime-cacert-directory=

# If this option is set then CAcerts are kept in a single container
# "file" similar to a remote configuration file instead of in the
# ca-cert-directory. The value can be a remote or local folder
# specification like for a non-standard pinerc value. The default
# is that it is not set.
smime-cacert-container=

# RSS News feed
rss-news=

# RSS Weather feed
rss-weather=

# Web Alpine index table row height
wp-indexheight=

# Web Alpine number of index lines in table
wp-indexlines=

# Web Alpine aggregate operations tab state
wp-aggstate=

# Web Alpine various aspects of cross-session state
wp-state=

# Web Alpine preferred width for message display in characters
wp-columns=